Adc Campus-REX2 RS Manual do Utilizador Página 127
- Página / 166
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Chapter 7 - Using the LCD for Configuration and Management
Campus-REX2 RS Interface Card User Manual 115
VIEWING SYSTEM INFORMATION
Through the LCD menu you can view the following product information
(with the option name in parentheses):
• firmware version and PROM checksum (S/W REV and S/W CKSUM)
• hardware configuration information (H/W CONFIG)
• local unit ID (LOCAL UNIT ID)
• remote unit ID (REMOTE UNIT ID)
• remote interface card type (REMOTE I/F)
• circuit ID (CIRCUIT ID)
You cannot change any of this information through the LCD. Use an ASCII
terminal to set the local and remote unit IDs, and the circuit ID. See
“Identifying the Unit and Circuit” on page 67.
To view the system information:
1 Press Escape until CAMPUS RS I/F: REX2 is displayed.
2 Press Enter to view the firmware version and PROM checksum.
3 Press Next to scroll through the remaining options.
VIEWING STATUS INFORMATION
The LCD provides access to the following status information:
• Ethernet information, such as the MAC address and 10/100Base-T status
• Current HDSL margin
• Frame statistics on the LAN (Ethernet) and Line (HDSL) ports
- CAMPUS-REX2 RS INTERFACE CARD 1
- VERSION 5.1 1
- FCC NOTICE 3
- USING THIS MANUAL 4
- DOCUMENT CONVENTIONS 4
- Document Conventions 5
- TABLE OF CONTENTS 7
- Table of Contents 10
- Table of Contents 11
- INSTALLING AND 13
- ACCESSING THE REX2 13
- INSTALLING THE CAMPUS-REX2 14
- Guide rail 15
- Campus-REX2 RS 15
- Interface card 15
- Campus-REX2 RS Interface card 16
- CONNECTING THE ETHERNET LINE 17
- Category 5 cable 18
- Black cable 21
- (Category 3) 21
- PairGain 23
- LOGGING IN 24
- Circuit ID: 25
- LOGIN PASSWORD > 25
- REMOTE_LOGON PASSWORD > 27
- LOGGING OFF 28
- USING THE MENUS 28
- OPERATING WITH DEFAULT VALUES 29
- CONFIGURING 31
- HDSL PARAMETERS 31
- CONFIGURING HDSL PARAMETERS 32
- Selecting HDSL Parameters 33
- Using Standard Mode 34
- Using Extended Mode 35
- CONFIGURING HDSL ALARMS 38
- Setting HDSL Alarms 39
- CONFIGURING THE REX2 41
- TATUS SCREEN 42
- Configuring Bridge Features 44
- Viewing Spanning Tree Status 48
- Viewing the Bridge Table 53
- Viewing the ARP Table 54
- Configuring Routing Features 58
- Configuring the IP Addresses 59
- Configuring RIP 61
- Configuring DHCP Services 65
- Accessing the Routing Tables 68
- ANAGEMENT 72
- Entering SNMP Parameters 73
- Configuring Trap Receivers 75
- MANAGING 77
- SYSTEM PARAMETERS 77
- CCESSING SYSTEM CONFIGURATION 78
- SETTING THE TIME AND DATE 79
- SETTING A PASSWORD 81
- RESTORING DEFAULT VALUES 82
- Are You Sure (Y/N) ? y 83
- Hit Any Key to Continue 83
- VIEWING PRODUCT INFORMATION 84
- MONITORING AND TESTING 85
- CAMPUS SYSTEM 85
- MONITORING HDSL PERFORMANCE 86
- Viewing Local Alarm History 91
- VIEWING ETHERNET STATISTICS 92
- Viewing Bridge Statistics 93
- Viewing Router Statistics 95
- PERFORMING TESTS 97
- Performing Loopback Testing 99
- RESETTING THE CAMPUS UNIT 101
- MANAGING SOFTWARE 103
- PGRADING CAMPUS UNIT SOFTWARE 104
- RECOVERING SOFTWARE 107
- MANAGEMENT 109
- USING THE LCD FOR 109
- CONFIGURATION 109
- NAVIGATING THE LCD MENUS 110
- SETTING THE HDSL PARAMETERS 111
- Configuring Standard Mode 112
- CONFIGURING THE CAMPUS-REX2 115
- Configuring REX2 Parameters 116
- Setting the Encapsulation 117
- Setting Bridge Configuration 118
- Setting Router Configuration 119
- Saving the REX2 Configuration 120
- IEWING AND CONFIGURING ALARMS 121
- Configuring Alarm Thresholds 122
- Local Alarms 123
- Remote Alarms 124
- CONFIGURING LOOPBACKS 125
- Initiating a Loopback 126
- Clearing a Loopback 126
- Setting the Loopback Timeout 126
- VIEWING SYSTEM INFORMATION 127
- VIEWING STATUS INFORMATION 127
- PORT STATISTICS 128
- Bridge Port Statistics 129
- Router Port Statistics 130
- INTERNETWORKING AND 131
- MANAGEMENT OVERVIEW 131
- APPLICATION 133
- Point-to-Point LAN Extension 134
- LAN Connections Over a WAN 135
- About MAC-Level Bridging 136
- About Spanning Tree Protocol 136
- Example Physical Network* 137
- Loop-free Topology 137
- Using Spanning Tree Protocol 137
- IP ROUTING 138
- Dynamic Routing 141
- Campus-REX2 IP Addresses 141
- Internet 143
- MANAGEMENT PROTOCOLS 144
- MIB AND TRAP SUPPORT 145
- ENCAPSULATION PROTOCOLS 147
- RODUCT COMPATIBILITY 148
- TECHNICAL REFERENCE 151
- DEFAULT SETTINGS 152
- ETHERNET PORT 153
- STANDARDS 153
- ABBREVIATIONS 155
- Appendix B - Abbreviations 156
- CONTACTING ADC 157
- Appendix D - Contacting ADC 158
- Numerics 159
- ART NUMBER: 1269224 166
Manuais e produtos relacionados com Hardware Adc Campus-REX2 RS
Hardware Adc ISDN NT11010 Manual do Utilizador
(24 páginas)
(24 páginas)
Hardware Adc LoopStar 750 Manual do Utilizador
(4 páginas)
(4 páginas)
Hardware Adc ETP-64 Manual do Utilizador
(2 páginas)
(2 páginas)
Hardware Adc Soneplex P-61-743 Manual do Utilizador
(30 páginas)
(30 páginas)
Hardware Adc 400F Manual do Utilizador
(114 páginas)
(114 páginas)
Hardware Adc Baluns Series Manual do Utilizador
(5 páginas)
(5 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais