ADC 1000 Especificações descarregar pdf (Página 5)

Changing the Base Address Settings for the ADC1000 and PC2000

To change the Base Address settings on the ADC1000 and PC2000, see the bank of switches on the A/D board:

The Base Address may be changed via the first 6 switches (the IRQ may be changed via the last 3 switches).

Switches in the OFF position have the decimal values shown. Switches in the ON position have a value of zero.

The Base Address is the sum of the values of the switches. In the default setting, switches 5 and 6 are added to

give a total of 768. A few of the many combinations for Base Address settings are below. After you have

changed the switches, reinstall the card and change the software settings to match the hardware settings. (See

pages 1-4 for instructions.) The gray block indicates the position of the switch.

Installation Instructions: ADC1000 & PC2000 (for Windows 95/98 Users)

-5-

Switch # 123456

OFF

Decimal equivalent 16 32 64 128 256 512

Value as shown 256 512

Switch # 123456

OFF

Value as shown 16 256 512

Switch # 123456

OFF

Value as shown 32 256 512

Switch # 123456

OFF

Value as shown 16 32 256 512

switch is in the on, upward position =

Example: 768 decimal = Hex300 = 0x300 (Default Setting)

Example: 784 decimal = Hex310 = 0x310

Example: 800 decimal = Hex320 = 0x320

Example: 816 decimal = Hex330 = 0x330

1 2 3 4 5 6

Sem comentários

ADC 1000 Especificações Página 5