Adc EMU-830 Manual do Utilizador descarregar pdf (Página 40)

Chapter 3: Provisioning September 25, 2006

3-8 LTPE-UM-3159-02

Enabling or Disabling Alarm Reporting

To enable or disable alarm reporting for DSL circuits:

Config Menu

In the Main menu screen, use the

Æ arrow key to select Config; then press C to display the items in the Config

menu (Figure 3-4). Provisioning of all shelf parameters is conducted from the Config menu. Each menu item is

described in the paragraphs that follow.

Figure 3-4. Config Menu

Network Parameters Menu

In the Config menu, press N to display the Network Parameters menu (Figure 3-5 on page 3-9). This menu is used

to identify and change the EMU network parameters. The Network Parameters menu options are listed in Table 3-5

on page 3-10.

Step Action

1 In the Main menu screen (Figure 3-3 on page 3-5), type the number 1 in the ENTER SELECTION field

and press ENTER. The Enter line unit number field displays the current line unit selection and Enable or

Disable setting.

Enter a line unit number, then use the

Ç arrow key to select the current Enable or Disable setting.

3Use the SPACEBAR to select Enable or Disable.

4 Press ENTER to confirm settings.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 73 74

Sem comentários

Adc EMU-830 Manual do Utilizador Página 40