ADC Cuda 12000 Informações Técnicas descarregar pdf (Página 200)

100

101

ADC Telecommunications, Inc.

200 C

HAPTER 9: MODULE ADMINISTRATION

Configuring the POS Clock Source

The Cuda 12000 allows you to configure the POS module as the clock source

for the primary clock (A) and secondary clock (B), which are contained on the

backplane.

If you use a POS module as the clock source, make sure that the interface on

the POS module has been configured to receive clocking from the other

(remote) side of the POS link. Refer to Chapter 10, “Packet Over SONET

Administration” for more information on configuring POS interfaces.

The following table describes the Card Drive Clock configuration parameters:

Ta b l e 9- 4 Card Drive Clock Parameters

To configure the POS module as the clock source, follow this procedure:

1. Navigate to the Card Summary folder.

2. Click the Card Summary tab. The Card Summary window appears.

(Refer to Figure 9-2.)

3. Refer to the Card Type column to find the POS module, which is listed as

forwarderOC3 or forwarderOC12.

4. Select the row that includes the POS module.

5. Click the Clock Synchronization tab. The Clock Synchronization

window appears. (Refer to Figure 9-3.)

Parameter Description

Card Drive Clock A Refers to the primary clock (A) on the backplane.

Configuration options are:

■ notSupported

■ Enabled

■ Disabled

Card Drive Clock B Refers to the secondary clock (B) on the backplane.

Configuration options are:

■ notSupported

■ Enabled

■ Disabled

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 689 690

Comentários a estes Manuais

Sem comentários

ADC Cuda 12000 Informações Técnicas Página 200

Comentários a estes Manuais

Manuais e produtos relacionados com Comutadores de rede ADC Cuda 12000