ADC Cuda 12000 Informações Técnicas descarregar pdf (Página 150)

100

101

ADC Telecommunications, Inc.

146 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS

Arguments

{enable | disable} Specifies one of the following values:

■ enable – Enables DHCP on the current cable interface.

■ disable – Disables DHCP on the current cable interface.

cpe-gateway <gi-address> Configures the IP gateway for CPE devices connected to

the current interface. You must enter one of the IP

addresses (interfaces) that you have added to the current

physical interface.

The relay agent on the card places this address in the

giaddr field of the DHCP packet before forwarding the

requests to the DHCP server. The server then checks the

LDAP database to see if you have configured subnets for

this network, and then selects the network address based

on the subnet definition.

Note that you must define subnets for the address that

you specify in this field; if the DHCP server cannot find a

corresponding subnet for this network, it will not assign IP

addresses.

cm-gateway <gi-address> Configures the IP gateway for cable modems connected to

the current interface. You must enter one of the IP

addresses (interfaces) that you have added to the current

physical interface.

The relay agent on the card places this address in the

giaddr field of the DHCP packet before forwarding the

requests to the DHCP server. The server then checks the

LDAP database to see if you have configured subnets for

this network, and then selects the network address based

on the subnet definition.

Note that you must define subnets for the address that

you specify in this field; if the DHCP server cannot find a

corresponding subnet for this network, it will not assign

the requesting device an IP address.

add-agent-options

{enable | disable}

Add additional DHCP relay agent functionality. Enable

this parameter if you have specified two different IP

gateways – one for modems and a different one for CPE

devices.

drop-mismatch

{enable | disable}

Used to authenticate DHCP client-to -server

communication. If enabled, configures the system to drop

DHCP server replies that do not contain an Agent ID

suboption that identifies origination from the DHCP server.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 651 652

ADC Cuda 12000 Informações Técnicas Página 150

Comentários a estes Manuais

ADC Cuda 12000 Informações Técnicas Página 150

Comentários a estes Manuais

Manuais e produtos relacionados com Comutadores de rede ADC Cuda 12000