Adc SG-1 Manual do Utilizador descarregar pdf (Página 138)

Chapter 7: Second Level Commands June 30, 2006

7-58 SG1-UM-8500-03

Example(s)

Using the no ip ospf interface command

This command disables OSPF on an interface.

Usage

no ip ospf interface <Ethernet | VLAN | ATM> <slot number>\<port number>

[\<sub-interface>]

For parameters and examples, refer to “Using the ip ospf interface command” on page 7-57.

Using the ip ospf interface hello-interval command

This command specifies the interval time in seconds between hello packets.

Usage

ip ospf interface <Ethernet | VLAN | ATM> <slot number>\<port number>

[\<sub-interface>] hello-interval <seconds>

Parameter(s)

The time interval between hello packets.

For additional parameters, refer to “Using the ip igmp proxy command” on page 7-51.

Example(s)

Using the no ip ospf interface hello-interval command

The command sets the interval time between hello packets to its default value.

Usage

no ip ospf interface <Ethernet | VLAN | ATM> <slot number>\<port number>

[\<sub-interface>] hello-interval

For parameters and examples, refer to “Using the ip ospf interface hello-interval command”.

Host(config)# ip ospf interface Ethernet 1 \ 2 area 12.3.5.6

Host(config)# ip ospf interface ATM 2 \ 1 \ 32 area 12.5.45.8

Host(config)# ip ospf interface VLAN 1 \ 2 \ 33 area 44.55.2.15

Host(config)# no ip ospf interface

Host(config)# ip ospf interface ... hello-interval

Host(config)# ip ospf interface Ethernet 1 \ 2 hello-interval 22

Host(config)# ip ospf interface ATM 2 \ 1 \ 44 hello-interval 32

Host(config)# ip ospf interface VLAN 1 \ 2 \ 33 hello-interval 23

Host(config)# no ip ospf interface ... hello-interval

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 225 226

Sem comentários

Adc SG-1 Manual do Utilizador Página 138