Adc SG-1 Manual do Utilizador descarregar pdf (Página 84)

Chapter 7: Second Level Commands June 30, 2006

7-4 SG1-UM-8500-03

The operating mode of the interface to be configured (see Table 7-2).

(mtu)

The maximum transmission unit. Select either:

• 1500 (default)

• 1544

Example 1

Example 2

Table 7-1. Configure Ethernet Ports

Host(config)# interface ethernet 0 \ 2 12.3.66.211 255.255.255.0 auto mtu 1500

interface ethernet 0 \ 2 12.3.66.211 255.255.255.0 auto mtu 1500

Note: The system should refuse to assign an address to an Ethernet interface which is in the subnet of the

other Ethernet interface and indicates the reason.

Host(config)# interface ethernet 0\2 192.168.3.5. 255.255.255.0

Operation Error:

ethernet address is not valid

Note: The system should ignore the interface ethernet command if the system is in Ethernet redundancy

mode. It will indicate a command failure to the system log and to the user interface (telnet).

Card Type Slot\Port Slot\Port 2

Gigabit Front I/O 0\1

Gigabit Rear I/O 0\2 0\3

Gigabit Front (PMC) I/O 1\1 1\2

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 225 226

Sem comentários

Adc SG-1 Manual do Utilizador Página 84